American Floor Products Company

|       Home       |       Product Search       |       Contact Us       |      Price List       |

RUBBER TREADS


A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z

ARMOR-TRED II®  Square Nose  (AT-713)
ARMOR-TRED II®  Curve Nose  (AT-714)

Diamond designed Armor-Treds® have set the standard for the industry combining beauty, long-life and ease of cleaning. Scientifically designed grooves allow dirt particles to fall below the walking surface and prevent excessive wear from abrasion. For use in high traffic areas.

Armor-Tred Curve Nose (AT-714) "As of 09/21/2009, there is a slight design change to enhance the performance of this treads. The corners are slightly rounded and the two slots have been eliminated."

SPECIFICATIONS (C.S.I. Div. 9 Stair Treads)
Armor molded rubber treads shall be made of top quality rubber compound, homogeneous colors, heat cured and free of blemishes. Superior compound eliminates necessity of metal-mesh inside the nosings. The front edge of the tread shall have a smooth border. The back 2-1/2" shall be free of design to facilitate cleaning. The front 10-1/4" shall have a horizontal diamond pattern.

Thickness: 1/4" overall.
Size: 13-1/4" deep.
Lengths: 36", 42", 48", 54", 60", 72"
Federal Spec: ZZ-T-001237-GSA-FSS and RR-T-650 Type A Type II
Matching Cove Risers (AT-707):
7" Cove Risers available 1/8" thick.

Marbleized or Solid Colors: (01)Snow White, (05)Stone, (09)Clay, (11)Canvas, (12)Hard Rock, (15)Cabernet, (18)Navy Blue, (20)Charcoal, (21)Platinum, (22)Pearl, (24)Gray Haze, (27)Mist, (28)Medium Gray, (29)Moon Rock, (30)Ink, (31)Zephyr, (32)Pebble, (33)Adobe Peach, (34)Almond, (38)Pewter, (40)Black, (41)Sea Breeze, (42)Sable, (43)Hyacinth, (45)Sandalwood, (47)Brown, (48)Gray, (49)Beige,

AT-713

Square or Curve Nose

(55)Silver Gray, (58)Windsor Blue, (59)Heather Green, (60)Taupe, (62)Tangerine Tango, (63)Burnt Umber, (64)Keylime, (70)Bluest, (71)Storm Cloud, (72)Harbour, (73)Palm Leaf, (74)Iris, (75)Lemon, (76)Cinnamon, (80)Fawn, (84)Blue Jeans, (85)Burgundy, (86)Hunter Green, (92)Blue Lagoon, (101)Seaweed, (121)Cement, (125)Blush, (128)Lavender, (129)Silk, (130)Sisal, (132)Espresso, (134)Gold Rush, (140)Carrot, (141)Lipstick, (142)Aquartic, (143)Marine, (144)Blueprint, (148)Paprika, (150)Wetlands, (151)Iguana, (152)Shamrock, (162)Sovereign, (163)Salsa, (164)Smolder, (165)Squashed, (166)Sienna, (168)Thunder, (185)Dreamsicle, (187)Pansy, (190)Greege, (192)Tidewater.

INSTALLATION
Cut to fit each step accurately and install with Armor Contact Adhesive.

Select Colors

Back to the top


BRIGADIER III TRED®  Square Nose  (AT-708)
The Brigadier Tred®, made only in solid colors, combines essential stair tread properties at nominal cost. Brigadier Treds® contain more pure rubber and less loading material which offers the maximum in resilience, noise absorption, and longer life. The 1-3/4" nosing of the square nose tread is designed to fit pan-filled stairs.

SPECIFICATIONS (C.S.I. Div. 9 Stair Treads)
Solid color, molded treads shall be made of top quality rubber compound, homogeneous colors, heat cured and free of blemishes. The front 7" of the tread is a diamond design surface with back portion smooth.
Thickness: 1/4" at the nose tapering to approximately 5/32"
Size: 12-1/4" deep.
Lengths: 36", 42", 48", 54", 60", 72"
Solid Colors: (107)Dk. Brown, (108)Black, (111)Lt. Gray, (127)Med. Brown, (142)Dk. Blue, (146)Med. Gray, (165)Burgundy, (166)Slate, (177)Beige, (183)Dk. Green.
Matching Brigadier Cove Risers (AT-706): 7" Riser available 1/8" thick.

INSTALLATION
Cut to fit each step accurately and install with Armor Contact Adhesive.

AT-708

New Adjusta-Nose Tread

Back to the top


CHEVRON-TRED®  Square Nose  (AT-750)
Chevron-Tred® has a distinct diagonal pattern which reflects light to give a two-tone effect and the frontal bars accentuate the nosing providing marked visibility of each step. Each groove is scientifically designed to allow dirt particles to fall below the level of shoe traffic so as to reduce wear due to grit abrasion. These treads are recommended for most types of commercial building installations.

SPECIFICATIONS (C.S.I. Div. 9 Stair Treads)
Molded tread shall be made of top quality rubber compound, homogeneous colors, heat cured and free of blemishes. The tread shall have short bars with alternating rows of disconnected bars in a chevron pattern. The back 3" shall be smooth to facilitate cleaning.
Thickness: 1/4" at nosing, tapering to approximately 1/8"
Size: 12-1/4" deep.
Lengths: 36", 42", 48", 54", 60", 72"
Colors: See ARMOR-TRED® above.
Federal Spec: ZZ-T-001237-GSA-FSS and RR-T-650 Type A Type II
Matching Cove risers (AT-707): 7" Cove Risers available 1/8" thick.

INSTALLATION
Cut to fit each step accurately and install with Armor Contact Adhesive.

AT-750

Square Nose

Back to the top


METROTRED®  No Riser  (ES-748)

The Metrotred® is now offered only in the 12-3/4" depth. The improved front 2" now has 4 full length ribs followed by the surface pattern with the back 3" smooth for easier cleaning. Metrotred® was designed for use in elegant surroundings, like concert halls, new car show rooms, museums, libraries, etc.

SPECIFICATIONS
Thickness:
7/32"
Depth: 12-3/4"
Widths: 36", 42", 48", 54", 60", 72"
Fire Rating: Class 1
Federal Spec: RR-T-65a Type A
Marbleized or Solid Colors: See ARMOR-TRED® above.

INSTALLATION
Install with Armor Contact Adhesive (AD-1303)

ES-748

Back to the top


ORBITRED®  (ES-718)
Orbitred® is now manufactured with or without the riser attached. For the architect or designer who wishes to give a flowing look to the step. On the other hand, if you want a contrasting color for the riser, the full step Orbitred® is the solution. Easy to clean design!. Orbitred® is perfect for use in public buildings, hospitals, churches, schools, office buildings, department stores, shopping malls, etc. The soft self-waxing surface helps to reduce area noise from shoe traffic, and the rubber compound tends to give better foot safety.

SPECIFICATIONS
Thickness:
1/8"
Depth: 18-3/4" with riser, 12-3/4" tread only.
Widths: 36", 48", 72"
Weight: 2.8 lbs./lin. ft. (with riser); 2.2 lbs./lin. ft. (tread only)
Colors:
(120)Onyx Black, (123)Midnight Charcoal, (133)Polished Pewter, (134)Platinum Gray, (137)Carriage Gray, (140)Sandstone Beige, (148)Deep Chestnut, (150)Sienna Sunset, (152)Cherry Red, (155)Alfresco Brick, (173)Golden Valley, (180)Aqua Teal, (181)Green Mint, (183)Lime Sorbet, (190)Blue Willow, (191)Night Sky.

Fire Rating: Class 1

INSTALLATION
Install with Armor Contact Adhesive (AD-1303)

ES-718

Back to the top


TIGER-TRED®  Square Nose Only Molded, Rubber with Metal Backing  (AT-712)
This rubber stair tread is intended for extremely heavy traffic areas, such as in schools, hotels, factories, public transportation vehicles, etc.

SPECIFICATIONS (C.S.I. Div. 9 Stair Tread)
Tiger-Treds® shall be made of specially compounded rubber molded on 0.22 gauge metal backing to ensure dimensional stability under heavy traffic.
Thickness: 5/16" overall.
Depth: 10-1/2" or 15" (nose to back of tread)
Lengths: 36", 40", 50", 62"
Weight: 5 lbs./sq. ft.
Color: Black only.

INSTALLATION
Cut to fit each step accurately and install with Armor Contact Adhesive or Epoxy Adhesive for outdoor use.

AT-712

Back to the top

AMERICAN FLOOR PRODUCTS COMPANY
T/A: AFCO-USA
7917-G Cessna Avenue
Gaithersburg, MD 20879-4167

Toll Free Phone: (800) 342-0424
                  Phone: (301) 987-0490
                    Fax: (301) 987-0422

Email: sales@afco-usa.com
URL:  http://www.afco-usa.com